• 877.677.4327
  • |
  • Customer Service

Bushing

View: Grid | List
Showing 1 - 8 of 8
Filter
Products (8)
Information (3)
NRS Oar Mount Nylon Bushing - Item #91043.01

…cataraft or drift boat. * Note: These bushings are only for the newer hot-forged oar mounts. They will not fit the older cast oar mounts. * To replace bushing, tap out the old bushing from the bottom of the mount, then press in the new bushing. * Bushing is 1 7/8" in length and the inside diameter…

  (1)

$3.00

NRS Frame 6" Oar Mount - Item #91040.02

…us to streamline the design, reducing the 6-inch Oar Mount's weight by 25% over the older model. * A tough nylon bushing allows the oarlock shank to rotate friction free, and the bushing is easily replaceable, Item # 91043.01. * You can easily adjust the oar mount's height by rotating it on the side…

  (2)

$37.50 - $74.95

NRS Frame 10" Oar Mount - Item #91042.02

…to streamline the design, reducing the 10-inch Oar Mount's weight by 25% over the older model. * A tough nylon bushing allows the oarlock shank to rotate friction free, and the bushing is easily replaceable, Item # 91043.01. * You can easily adjust the oar mount's height by rotating it on the side…

  (5)

$54.95 - $109.95

NRS Frame 8" Oar Mount - Item #91041.02

…us to streamline the design, reducing the 8-inch Oar Mount's weight by 25% over the older model. * A tough nylon bushing allows the oarlock shank to rotate friction free, and the bushing is easily replaceable, Item # 91043.01. * You can easily adjust the oar mount's height by rotating it on the side…

  (3)

$47.50 - $94.95

Oar Pins and Clips Sets - Item #77420.01

…clip pops off the pin in heavy maneuvering. * The 9" model has a 3 1/2" PVC bushing that orients the oar above the oar mount at approximately the same height as an open oarlock. * The 12" model has 1", 2" and 3 1/2" bushings, allowing you to adjust the oar height. * Don't forget your spare oar clip,…

  (4)

$49.95 - $55.95

Extra 9" or 12" Oar Pin - Item #77421.01

Extra Pin for the Pin and Clip Setup. 9" Pin Assembly comes with rubber bumper on top, one 3 1/2" PVC bushing, two washers and a nut. 12" Pin Assembly comes with rubber bumper on top, one each 1", 2" and 3 1/2" PVC bushings, three washers and a nut.

  (2)

$10.95 - $11.95

NRS Revo Rescue 2" Pulley - Item #45163.01

…prusik-minding pulley ideal for swiftwater rescue and climbing situations. * Featuring aluminum side plates and sheave with a self-lubricating bronze bushing, the Revo Rescue is rated for General use to the NFPA standard. * The pulley weighs 6.7 oz.(190 gm) and features a 2" (51 mm) diameter sheave.…

  (1)

$47.95

NRS Revo Compact 1.25" Pulley - Item #45164.01

…prusik-minding pulley ideal for swiftwater rescue and climbing situations. * Featuring aluminum side plates and sheave with a self-lubricating bronze bushing, the Revo Compact is ideal for any hauling and lifting work. * The pulley weighs 2.8 oz.(78 gm) and features a 1.25" (31 mm) diameter sheave.…

$34.95

View: Grid | List
Showing 1 - 8 of 8